4.45 (97 reviews)
☑ Basics of Omron PLC.
☑ Bit Logic and Latching and Unlatching Concept.
☑ Timer and Counter.
☑ Compare Instruction (= =, < >, > =, < =, > and <)
☑ Mathematical Instruction.
☑ Move, Keep, Increment and Decrement Instruction.
☑ Program Control Instruction.
☑ You will be enriched with the latest technical knowledge related with the industrial automation.
☑ Students can establish their career in various manufacturing industries like Oil and Gas, Water/Waste Water Treatment, food & Beverages, Power Plants, Manufacturing Process, Chemicals and Pharmaceutical Industries, Power Generation, Automotive, Fabricated Metals, Packaging Process, Metals and Mining’s Aerospace, etc.
Today, PLC is being used in every process and manufacturing industries, apart from knowing the wires and connections, anyone should know the way to do PLC programs.
PLC-Programmable logic controller is an industrial solid-state computer that monitors input and output, and makes logic-based decisions for automated processes or machines.
OMRON PLC has supported industry with innovative solutions and advanced technologies. Omron Programmable Logic Controllers (PLC) designed with high processing speeds and full transparency. Omron PLC's provide users with numerous functions and controls from small scale equipment to entire production lines.
CX-Programmer is programming software for all Omron's PLC series. CX-Programmer includes various types of features to accelerate the development of your PLC program.And this course is covering complete programming of PLC Model CP1E-E14DR-A of Omron PLC.
After doing this course, you can easily program the other OMRON PLC series.This software is used for all the Omron PLC series. And the instructions remain the same.
This course will teach you step by step How to make a Ladder Logics & Programming to any industrial process Control.
We have made explanation by Real Time LIVE Camera & Designing Software to understand the concept clearly.
NOTE: This course is not short an summary course, this course is detailed course. All topics are covered in it, from scratch. You can understand this course even you don't know about PLC . If you are working in this field, you can enhance your knowledge from this course.
Following is the brief information about the course:
Introduction of PLC.
Functions and Features of PLC.
What is Sink and Source concept?
Working Principle of PLC (Scan Time and Scan Cycle of PLC).
Wiring Connection and Communication of PLC.
Bit Logic with Interlocking and Holding Concept.
Timer, Counter, Compareinstruction, Math instructions,
Move, Keep, Increment and Decrement Instruction
Program Control instructions etc.
And many more instructions are covering in course.
Problems with Solution (Industrial Level).
Overview of PLC
Introduction to PLC
Block Diagram of PLC
Working Principle of PLC (Scan Time and Scan Cycle of PLC)
What is Sink and Source concept ?
PNP and NPN wiring of sensor with PLC (Example Sink and Source Input)
Wiring Connection and Communication of PLC
Basics of Omron PLC
Introduction to Omron PLC
Functions and features of Omron PLC
Software Interfacing for Omron PLC
Addressing Format in Omron PLC
Basics of Ladder Diagram
Bit Logics (NO Type)
Bit Logics (NC Type and Output Coil)
Programming Language of PLC with Basic Example
Basic Programming Rule 1
Basic Programming Rule 2
Basic Programming Rule 3
Basic Programming Rule 4
Basic Programming Rule 5
Basic Programming Rule 6
Problems-1 with Solution
Problems-2 with Solution
Problems-3 with Solution
Problems-4 with Solution
Ladder Logic Program for Boolean Expression
Logic Gates (AND & OR Gate)
Logic Gates (AND & OR Gate) in Software
Logic Gates (NAND & NOR Gate)
Logic Gates (NAND & NOR Gate) in Software
Logic Gates (EX-OR & EX-NOR Gate)
Logic Gates (EX-OR & EX-NOR Gate) in Software
Latching and Unlatching Concept
Introduction to Latching (Holding) and Unlatching Concept
Latching (Holding) and Unlatching Concept in Software
Latching and Unlatching Problem-1
Latching and Unlatching Problem-1 Solution Explanation
Latching and Unlatching Problem-1 Solution in Software
Introduction of Set and Reset Instruction
Set and Reset Instruction in Software
Differential Up and Down Instructions
Interlocking Concept in Software
Introduction to Timer
How to provide Pre-Set value in Timer
Non-Retentive Timer (TIM and TIMX) Part-1
Non-Retentive Timer (TIM and TIMX) Part-2
Non-Retentive Timer (TIMH and TIMHX)
Non-Retentive Timer (TMHH and TMHHX)
Retentive (Accumulative) Timer (TTIM and TTIMX)
Problem-1 with Explanation
Problem-1 Solution in Software
Problem-2 with Explanation
Problem-2 Solution in Software
Problem-3 (Traffic Light)
Problem-3 Solution Explanation
Problem-3 Solution in Software
Problem-4 (Based on Bit Logix and Timer)
Problem-4 Solution Explanation
Problem-4 Solution in Software
How to create Flickr Bits ?
How to increase time delay capabilities of timers method 1 st ?
How to increase time delay capabilities of timers method 2 nd ?
Introduction of Counter
Counter (CNT) Part-1
Counter (CNT) Part-2
Reversible Counter (CNTR) Part-1
Reversible Counter (CNTR) Part-2
Problem-1 Solution Explanation
Problem-1 Solution in Software
Compare Instruction (= =, < >, > =, < =, > and <)
Introduction of Compare Instruction Part-1
Introduction of Compare Instruction Part-2
Input Comparison Instruction Part-1
Input Comparison Instruction Part-2
Input Comparison Instruction Part-3
Introduction of Mathematical Instruction
Multiplication and Division Instruction
Problem-1 with Solution
Move, Keep, Increment and Decrement Instruction
Introduction of Move Instruction with in Software
Introduction of Keep Instruction with in Software
How to provide ON Delay for a Load using Keep Instruction ?
Increment and Decrement Instruction
Program Control Instruction
Introduction of Program Control Instruction
Introduction of Sequence Control Function
Introduction of CJP, JMP and JME Instruction
CJP, JMP and JME Instruction in Software
Introduction of Subroutine Instruction
Subroutine Instruction (SBS, SBN and RET)
Subroutine Instruction (SBS, SBN and RET) in Software
Introduction of IL and ILC Instruction
IL and ILC Instruction in Software
Problem-1 Based on CJP and JMP
Problem-1 Solution with Explanation
Problem-1 Solution in Software Part-1
Problem-1 Solution in Software Part-2
Problem-2 Based on Subroutine
Problem-2 Solution with Explanation
Hi there! I finish the course within two weeks! It was really good, but the lack of PDF instructions and small quizzes refrained me to give 5 starts. It is only an introduction to Omron PLC CX-Programmer. If they make more advanced courses I would totally buy it! Thank you!
the instructor is providing the fundementals required before diving into programing. He's explaing all the basic background knowledge at a very reasonable pace and with excelent examples.
The course concept not bad, but it would be great if instructor improve his organization writing. I've difficult understand the last three section.
Si esta clara y sistematizada. He logrado despejar algunas dudas que tenia en la programacion con estas instrucciones de tiempo.
It has a great experience for me taking the first steps on ladder logic and plc programming. I am very happy with this course and plan on taking others after. Thank you
I am hoping that the instructor would prepare for advanced course in the coming future. It is really helpful for beginners to understand what PLC is. i really recommend people who want be control engineers in manufacturing plant to study in this course. Thanks
Its a good start so far. Instructor needs to speed up on some tutorials, but slow down on others. He also needs to not repeat himself so much.
Jump and Subroutine instructions will be of great help/use to me in programming a complicated logics. Thank you very much to our instructor. I hope you'll offer a next course for this such as programming of special I/O's like high counter and analog input/ouput applications, & also Omron HMI.