Design of Sewage Treatment Plant (STP)

It is ok. It could be more animated and the design of the case study should be in parallel with graphics.

I work as an Application Engineer selling pumps for municipal wastewater and wanted to know a high level of the process and where the pumps I sell are in that process. This is very helpful for that purpose.

There should be clear units what your're speaking of ? What if it is a greenfield project what assumptions should be taken for that when BOD is not available in the first place. Always show the formulas properly with answers and units of the answers. Don't be too Hasty

This was a great course, I learned designing steps with process write up and scheme for it. especially familiar with unit operation involved and design considerations. I recommend environmental engineers and chemical engineers to pursue this one, I believe this course would enhance my professional traits to design and in-depth knowledge would encourage me to simulate and modeling at GPS X v7.0 for clients. regards, Syed Irtaza Haider Process Engineer GASCO Engineering Pvt Ltd

The course materials are good ,but some more detail required like quality of Media to be selected,issues related to design.

This course is simple easy to understand and with the case example i got better understanding of this.

yeah, it was but i will also like to get the material for the course to help me further understand the calculation aspect of the designing process

It is average. No blower sizing was discussed, no other technology for aeration was discussed, no BNR discussed, other parameters and key design criteria were not discussed, forgot about chlorination, filter press was not initially discussed, further technicalities were not discussed. it is too fast, i assume the neophytes may not easily catch up.

a very good and concise course that gives an overview of the designing part of the STP. The case study explained at the last makes the understanding very easy. Thanks for this wonderful course

Its very good. I am hoping for more industry case oriented course material. I have not seen the problem statement yet though

This course was very well presented. The presenter on the course did a lot of work tho compile all the information in a brief course. The encourage me to become a specialist in water treatment

it was good but the instructor the way she give the lecture like we knew the subject already especially in calculator and description need to use pointer to make us focus with her

A very well organised course that covers both the basics and the advanced elements design. What I find remarkable was that rather than abstract suggestions, thumbrules and 'useful pointers', the author gives exact formulas to size unit operations. Perfect one for ppl looking oiut for an opportunity to work in water treatment field. One suggestion to the author: would have been even better if SBR technology was also covered. Hopefully you will cover it in another course! :-)

- thanks to refresh my knowledge. - case study attached is not enough to cover the course due to: 1- M calculation result is not correct , 25/0.1 = 250 not 208 . 2- Screen Details such screen width and determine number of bars up to motor power for screen motor are not included. 3- sizes of aeration and sedemintation tanks need mor details for easy drawing. 2- all depths calculation are related to hydraulic flow diagram and process hydraulic friction which are not considered in the course, are very important in design calcultions to determin volume of each tank . 3- I recommended to add one more case study with higher capacity ( 50000 m3/d) with design details including items ubove and hydraulic flow diagram.